- Display 100 Products per page
-
The Original Bavarian Beer Garden Table Set – Classic model
This folding set is made of selected, well-seasoned and dried softwood. The wood is glued with weather-resistant wood glue. The tree branches are dowelled out, the resin pockets are burned out and then puttied. The careful rounding of the corners and edges prevents the risk of injury.
The wooden panels are treated on all sides with thick layer varnish, which penetrates deep into the wood. Thus, it is optimally protected against weather influences and a particularly long durability is guaranteed. Our care instructions are to be observed.
The stacking strips attached to the undersides of the tables and benches allow for optimal storage in the smallest of spaces. The solid bases are made of angle steel (30/30/3 mm).
The robust snap locks guarantee perfect security of the complete system folding set.
The shades of wood and metal are made according to customer requirements.
Standard size: table 86" x 19" x 1,06 " (220 x 50 x 2.7 cm), bench 86" x 9,8" x 1,18" (220 x 25 x 3.0 cm)
Alternatively table width 23"/27"/31" (60, 70 and 80 cm), other formats on request. -
The Original Bavarian Beer Garden Table – Model Cross -System
Consisting of softwood, corners and edges rounded. Treated with thick film varnish. Shade of wood treatment as desired. The solid bases made of angle steel 30/30/3 mm are painted green.
The newly developed base model cross system provides optimum comfort and seating pleasure. The legs or the knee, have sufficient space in the area of the uprights and there is no risk of injury.
Standard size: table 86" x 19" x 1,06 " (220 x 50 x 2.7 cm), bench 86" x 9,8" x 1,18" (220 x 25 x 3.0 cm)
Alternatively table width 23"/27"/31" (60, 70 and 80 cm), other formats on request. -
The Original Bavarian Beer Garden Table Set – Model B
Consisting of softwood, corners and edges rounded. Treated with thick film varnish. Shade of wood treatment as desired. The solid bases made of angle steel 30/30/3 mm are painted green.
The newly developed base model B offers optimal comfort and seating pleasure. The legs or the knee, have sufficient space in the area of the uprights and there is no risk of injury.
Standard size: table 86" x 19" x 1,06 " (220 x 50 x 2.7 cm), bench 86" x 9,8" x 1,18" (220 x 25 x 3.0 cm) -
Transport boxes for Beer Garden Table Sets
Transport pallet made of metal, painted or hot-dip galvanized. Ideal for practical storage and safe transport of beer garden table sets.
Pallets can be stacked on top of each other, side walls can be inserted or folded open.
Load per pallet: 10, 15 or 20 beer garden table sets -
Mini snack bench
For the buffet or for fancy food and beverage presentation.
On the table is then plenty of space to enjoy the snack.
Consisting of coniferous wood, folding bases of round tube (metal). Wooden panels and bases painted in the color of your choice. At the ends of the feet are plastic caps.
Format: L=55 cm/ W=20 cm/ H=25 cm
Other formats can be produced upon request. The bases are attached to the bottom of the wooden panel, so there is enough space for your advertising logo (screen printing) on the top. -
The Original Bavarian Garden Table Set – Classic Model (Length 120cm)
Consisting of coniferous wood, corners and edges rounded. Treated with thick film varnish. Color of wood treatment as desired. The solid bases made of angle steel 30/30/3 mm are painted green. Standard format: table 47" x 19" x 1,06" (120 x 50 x 2.7 cm), bench 47" x 9,8" x 1,1" (120 x 25 x 3.0 cm) Alternative table width 23"/27"/31" (60, 70 and 80 cm), other formats on request. -
Coat hook rail with folding hooks
Everyone knows the problem: sitting comfortably in a beer garden and not knowing where to put your bags, helmets, jackets etc..
We have the solution to this problem. From many years of experience, we have developed the coat rail Happy developed.
Finally a beer garden that makes everyone happy. No need to hold the bag between your legs, no need to store helmets and jackets on the table.
Our coat rack
Happy
can simply be screwed to the bottom of the table, suitable for all types of beer tent tables in all sizes, as well as for all tables used in beer gardens and restaurants.
Despite the coat rack attached to the table, it can still be stacked when folded by simply folding down the hook.
The format of the coat rack
Happy
is L 470 mm / H 35 mm.
Happy
offers 3 double hooks for hanging objects. -
The Original Bavarian Beer Garden Table Set – Classic Model (with backrest)
Consisting of coniferous wood, corners and edges rounded. Treated with thick film varnish. Color of wood treatment as desired. The solid bases made of angle steel 30/30/3 mm are painted green. Oktoberfest-Quality-Standard! Standard size: table 220 x 50 x 2.7 cm, bench 220 x 25 x 3.0 cm
Alternatively table width 60, 70 and 80 cm, other formats on request. -
The Beer Garden Table Set – Model Bavaria (With Backrest)
This beer garden set is ideal for outdoor use. Consisting of coniferous wood, treated with thick layer varnish in the color of your choice, for example, nut brown, natural or orange. Underframes made of angle steel 30/30/3 mm painted in green, anthracite or your choice. Alternatively available with table frame model cross system.
Sizes: Table in length: 86" (220 cm) / in width 19"/23"/27"/31" (50/60/70/80 cm)
Bench in length: 86" (220 cm) / in width 11" (28 cm)
Other formats on request from length (49") 125 cm to (86") 220 cm -
Semi-finished products
[av_textblock textblock_styling_align='' textblock_styling='' textblock_styling_gap='' textblock_styling_mobile='' size='' av-medium-font-size='' av-small-font-size='' av-mini-font-size='' font_color='' color='' id='' custom_class='' template_class='' av_uid='av-lz8ijivq' sc_version='1.0' admin_preview_bg='']
Product and service in a maximum of quality, we achieve through an extraordinary vertical range of manufacture in the production of our products. Last but not least, we also offer our customers the purchase of semi-finished products made of metal or wood, such as
- Glued wood panels according to customer specifications
- Planed goods
- Surface treatment by means of glaze or varnish
- Metal structures according to specification
- Pipe processing
- Galvanizing, powder coating, dip painting
- Welding, turned parts, stamped parts
- Other
Based on the work to be performed and taking into account your product specifications, we will submit a non-binding offer. Feel free to use our inquiry form or contact us by phone.
[/av_textblock] -
Folding set for Children`s
Consisting of coniferous wood, corners and edges rounded. Treated with thick film varnish. Color of wood treatment as desired. Underframes made of sturdy tubular metal, painted silver, foldable. Format: table 125 x 50 cm / bench 125 x 27 cm, other formats on request -
Folding set for children – Model X – T R A with backrest
Consisting of coniferous wood, corners and edges rounded. Treated with thick film varnish. Color of wood treatment as desired. Base frame made of sturdy flat steel, painted black, foldable. Format: table 125 x 50 cm / bench 125 x 27 cm, other formats on request -
bar table model Easy
Material: table top made of coniferous wood, corners and edges rounded. Lacquering color of your choice. Table top thickness approx. 27 mm. Base frame made of 30/30/3 mm angle steel, painted green.
Format: L=220 cm/ W=70 cm/ H=110 cm or width 60 cm -
Bar table model Jumbo
Material: table top made of coniferous wood, corners and edges rounded. Lacquering color of your choice. Table top thickness approx. 27 mm. Base frame made of 30/30/3 mm angle steel, painted green.
Format: L=220 cm/ W=70 cm/ H=110 cm or width 60 cm -
Bistro bar table
Material: table top made of coniferous wood, corners and edges rounded. Lacquering color of your choice. Table top thickness approx. 27 mm. Base frame made of tubular steel approx. Ø 28 mm, powder-coated green.
Format: H=110 cm/ L=160 cm/ W= approx. 60 cm -
High table model plastic top
Material: table top made of solid plastic polyethylene HDPE 500, available in different color designs e.g. white-black marbled. Base frame made of 30/30 mm square tube, galvanized or powder-coated.
Format: thickness of the table top 20 mm, diameter 80 cm, height 110 cm. -
Bar table model beer garden
Material: wood in ash, lacquered in color of your choice. Hot-dip galvanized or powder-coated frame made of flat steel 20/5 mm.
Format: height 110 cm, table top Ø 80 cm -
Bar table model Rondo
Material: softwood table top, lacquer color shade of your choice.
Base made of metal 30/30 mm square tube, painted green Format: height 110 cm, table top Ø 80 cm, thickness approx. 27 mm -
Bar table model Vario
Material: table top made of coniferous wood, corners and edges rounded. Painting color shade of your choice. Table top thickness approx. 27 mm. Base made of metal 30/30 mm square tube, paint color of choice or galvanized. Format: L=120 cm/ W=70 cm/ H=110 cm -
Bar table model Quattro
Material: table top made of coniferous wood, corners and edges rounded. Painting color shade of your choice. Table top size: L=220 cm/ W=25 cm. Underframes made of angle steel 30/30/3 mm painted green.
Format: L=220 cm/ W=220 cm/ H=110 cm -
Bar table model beer garden (plastic top)
Material: table top made of solid plastic polyethylene HDPE 500, available in different color designs e.g. white-black marbled.
Hot-dip galvanized or powder-coated frame made of flat steel 20/5 mm.
Format: thickness of the table top 20 mm, diameter 80 cm, height 110 cm. -
Original Bavarian beer garden furniture
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice.
The wooden slats are rounded on all sides and therefore extremely weather-resistant. Due to the rounding, there is no edge breakage during paint application, which would occur if the edges were only chamfered.
The slats of the tables have a width of approx. 113 mm, which means that the table surface has fewer joints.
(table format 120x70, 120x80, 70x70 cm or round 90, 103, 113 cm, height 75 cm, other formats on request) -
Beer garden chair model 1
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 1.2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 1.3
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 2.2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 2.3 (with 5 seat slats)
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Alternatively with 2 back slats. -
Beer garden chair model 2.4 (with 5 seat slats)
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Alternatively with 2 back slats. -
Beer garden chair model 3
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 3.2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 3.3
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 3.4
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 4
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 4.2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Straight or curved back and seat slats. -
Beer garden chair model 5
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 5.2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden chair model 6
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Back slats slightly curved and seat slats straight. -
Beer garden chair model 7 (plastic)
Material: Plastic slats in the color of your choice. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden bench model 1
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden bench model 2
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden bench model 3
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden bench model 4
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Square beer garden table
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden table round
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden table (plastic)
Material: Plastic table top in the color of your choice. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Transport pallet for beer garden tables
Transport pallet made of hot-dip galvanized, sturdy square steel. Special wooden pallet at the bottom. Ideal for practical storage and safe transportation of the beer garden tables. Pallets can be stacked on top of each other.
Contents of the pallet: 10 tables (round or square up to 120 cm long) -
Transport pallet for beer garden chairs
Transport pallet made of hot-dip galvanized, sturdy square steel. Special wooden pallet at the bottom. Ideal for practical storage and safe transportation of the beer garden chairs. Pallets can be stacked on top of each other.
Contents of the pallet: 54 chairs -
Beer garden standing chair
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. -
Beer garden bar table
Material: Wood in ash, treated with thick-layer lacquer in the color nut brown, chestnut, pine brown or as desired. Metal frames made of 20/5 mm flat steel, hot-dip galvanized or powder-coated in the color of your choice. Format: height 110 cm, table top Ø 80 cm -
Coat hook rail with folding hooks
Everyone knows the problem: sitting comfortably in a beer garden and not knowing where to put your bags, helmets, jackets etc..
We have the solution to this problem. From many years of experience, we have developed the coat rail Happy developed.
Further details under product area beer tent sets. -
Repair work on used beer garden table sets
Services:
Pre-treatment: (brushing) of the tops and edges of the wooden boards so that the paint can be applied to match the condition of the tables and benches. Final treatment: by means of a closed-pore thick-film coating in the color of your choice, with two coats of paint. No work is carried out on the undersides of the tables and benches.
The following criteria and properties of the wood may affect the durability of the new paint coat. Decay, existing patina or other build-up of pesticides, grease as well as moisture in the wood, cannot be eliminated. Old existing paint on the tables and benches is pretreated and repainted. Chipping and cracks in the wood are not eliminated.
For this we assume no liability and is excluded from any claim.
We do not check these criteria and they have to be checked by the customer. Only tables and benches on which the client wishes to have a new coat of paint applied are to be handed over to us.
The repair work is not carried out according to DIN or VOB standards and is also not to be assessed according to these.
Based on the above service description, we will be happy to submit a non-binding offer after consultation. Whether a small number or your entire inventory of marquee sets or beer garden furniture, use our inquiry form or contact us by phone to make an inquiry.
